Pneumatic control training device

1. M--n technical parameters

1. Power AC 220V 50Hz

2. DC power supply: Enter AC 220V, output DC 24V/2A

3. Oil -free silent --r compressor: Work power: AC220V; motor power: 780W nominal capacity 30L;

The rated output --r pressure is 0.8MPa, noise: 58 decibels

4. Tr--ning device Standard Size: 1500mm × 650mm × 1700mm

2. M--n features

1. It is m--nly composed of components such as tr--ning tables, tr--ning desks, pneumatic components, and electrical control devices.

2. The tr--ning table and tr--ning desk are iron double -layer sub -light -dense -densely spraying structures, and hydraulic components are stored in the tr--ning table drawer.

3. Equipped with commonly used pneumatic components for industrial, and all equipped with transition bottom plates, which can be convenient and randomly inserted on the tr--ning table panel (the panel with the "T" groove -in -form aluminum alloy profile structure). The loop overlap is fast -changing, which is convenient and fast for disassembly.

4. The pressure of the gas source is low, and the electrical control uses a low voltage DC 24V power supply; the tr--ning gas road, the control circuit are safe and reliable, and have control functions such as manual, automatic, and order.

5. The tr--ning control unit adopts an independent relay control unit for electrical control.

1. Product introduction

The device adopts the foundation of the front bridge of the automobile, which comprehensively demonstrates the composition and working process of the electronic control power steering system and the front bridge suspension system.

It is suitable for the teaching needs of the school's theoretical and m--ntenance tr--ning for electronic control to help steering systems.

 

2. Functional characteristics

1. Real and operable automobile electronic control to help steering systems, fully display the composition structure of the electronic control power steering system.

2. Adjust the engine speed and vehicle speed output simulation knob, simulate the changes of speed and speed, rotate the steering wheel left and right, and fully demonstrate the working process of the power control steering.

3. The tr--ning table panel adopts high -grade aluminum -plastic panels with 4mm thick corrosion resistance, strike, pollution resistance, fire prevention, and moisture -proof. In the control circuit diagram and physical objects, understand and analyze the working principle of the automotive power control steering system.

4. Electrical signals that detect the terminals and can detect electronic control steering system circuit components directly on the panel, such as resistors, voltage, current, frequency signals, etc. can be installed on the panel.

5. The tr--ning desk is installed with a diagnostic seat, which can be connected to a dedicated or general -purpose car decoder to read the self -diagnosis function of the electronic control steering system and clear the fault code.

6. The base of the tr--ning platform is welded with steel structure, and the surface is treated with spraying process. It has a self -locking wheel device. It is flexible, safe, reliable, and durable.

7. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D. It can select 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.

A. Turbine design and virtual disassembly interface can be selected from turbine sn--l pole cone gear reducer, second -level pilot gear reducer, conical cylindrical gear reducer, coaxial cylindrical gear reducer, cone gear reducer, first -class cylindrical, first -class cylindrical, Gear reducer.

The turbine sn--l tapered gear reducer: automatically play the assembly content after entering the software. Each step in the video has text description

Second -level unfolding cylindrical gear reducer: After entering the software, use the video to play content in the form of video. The video content should include: the name of the parts (scanning the QR code can see the part of the parts), the disassembly presentation (including disassembly, assembly), virtual disassembly Installation (including overall, low -speed shaft, mid -speed axis, high -speed shaft, box cover, box seat)