Two -phase anaerobic training desk

The integrated two -phase anaerobic biological treatment reactor is used to organize the space in the reactor to organically divide the space in the reactor into an acid -producing biological treatment reaction area, the two -phase anaerobic transition zone, the methane phase phase biological treatment The reaction area, mud water separation zone, gas phase area, etc., thereby achieving the purpose of two -phase anaerobic equipment. This reactor not only has simple management operation and high processing efficiency, but also has a small volume and small land, which reduces the cost of engineering, and is very suitable for the promotion and application of small and medium -sized high -concentration organic wastewater treatment projects.

Through the hope of this experiment, the following goals are achieved:

1. Understand the internal structure of the reactor;

2. Master the launch method of the reactor, the formation of sludge;

3. Dynamic tests on a cert--n sewage to determine process parameters and process water quality.

2. M--n technical indicators and parameters:

1. Environmental temperature: 5 ℃ ～ 40 ℃

2. Treatment of water: 2 ～ 5L/h

3. Design in and out of water quality range:

Inlet water BOD5 500 ～ 1000mg/L out of water 30 ～ 600 mg/L

COD 1000 ～ 2000mg/L out of water 100 ～ 200 mg/L

Inlet water SS 50 ～ 100 mg/L out of water 10 ～ 20 mg/L

Inlet water pH 6-9 out of water 6-9

Features

 

"Monochrome water tank liquid level control the physical model" is composed of organic glass water tanks, pumps, sinks and liquid levels. The control signal is controlled by the power amplification circuit to control the pump flow. The water enters the upper part of the organic glass water tank, and the lower part is controlled by a valve to control the water outlet of the water tank. The liquid level is detected, outputs the liquid level signal of 0-10V, and controls the liquid level switch and PID closed-loop control through the programmable controller () or computer control

 

Performance parameters

 

Work power: DC24V ± 5% 1A

 

Rated power: <0.3kW

 

Dimensions: 400 × 300 × 600mm (L × W × H)