Modular automatic production line training device

 

The tr--ning device is a typical mechanical and electrical integration and automation products. It is developed for vocational colleges, education and tr--ning institutions, etc. It is suitable for mechanical manufacturing and automation, electromechanical integration, electrical engineering and electrical engineering and Teaching and tr--ning of related majors such as automation, control engineering, measurement control technology, computer control, automation control and other related majors. It is close to the construction of industrial manufacturing on the basis of the industrial manufacturing site. Dual tr--ning teaching has been specially designed to strengthen various control and engineering practical capabilities.

The system includes pneumatic, motor -driven and control in electromechanical integration, control and control, inverter, touch screens, and other control technologies. It is suitable for relevant professional students to conduct tr--ning in engineering practice, curriculum design and engineering and technical personnel of the first position.

 

Technical Parameters:

 

1. Input power supply: single -phase three -line AC220V ± 10% 50Hz 50Hz

2. Working environment: The environmental temperature range is -5 ° C ~+40 ° C relative humidity <85%(25 ° C) altitude <4000m

3. Device capacity: <1.5kva

4. Device appearance size: 410cm*180cm*150cm

5. Single station workbench: 880mm*470mm*1500mm

 

Tr--ning project:

 

1. Understand the application of sensors

2. Observe the application of pneumatic elements

3. Master PLC control technology

Eight workstations in the tr--ning system of module flexible automation production line have a set of PLC hosts, which can be divided into eight complete and independent workstations for tr--ning. After the composition of various unit production processes and electrical control systems, it can be completed through PLC programming. The

1) System fault detection

2) Equipment procedure control

3) Workpiece handling program control

4) Workpiece detection procedure control

5) Workpiece handling and installation program control

6) Workpiece installation program control

7) Workpiece classification program control

8) Multi -working station program control

9) Work unit network program control

10) Step motor driver control

Overview:

Smart buildings and electrical installation tr--ning devices are two -story building platforms composed of aluminum alloy skeleton and activity mesh boards. Event and surrounding buildings. Building experimental tr--ning device rooms provide the installation range of the front and back walls and top walls, and also provide the door of the room. You can install electrical plug -in locks, electromagnetic locks, door magnetism, and closed doors. Realize the installation and operation of various types of systems in intelligent buildings, such as "intercom and indoor security systems" and "closed -circuit TV monitoring and peripheral security systems".

The "building electrical installation tr--ning system" is a two -story simulation building building built by 1 aluminum alloy stent and 17 mesh boards. , Two -floor channels, two -story channel windows, second -floor residents, second -floor resident door, second -floor resident windows, vertical shafts and surroundings of buildings. The room provides the installation range of the front and back walls and the top wall, which can be installed on it with various building intelligent devices. At the same time, the door and windows of the room can be installed. Eliminating devices can be installed and operated by various systems of intelligent buildings, such as "intercom and indoor security systems" and "closed -circuit TV monitoring and peripheral security systems". Compared with a single -layer simulation floor, the two -floor simulation floor needs to consider the multi -floor structural relationship of smart buildings. In addition to cultivating students' engineering construction capabilities, it can also cultivate their engineering design capabilities and engineering innovation capabilities, which is in line with the practice of colleges and universities in colleges and universities. Teaching needs.

The installation method of the device is consistent with the actual engineering. With the cooperation of self -attack screws and mesh plates with expansion fixed parts, students can complete the fixation of the device on one side of the simulation wall; The front of the hole plate) may be through the dark line of the rings (the opposite side of the mesh board).

Aluminum alloy bracket size: 3010mm × 1305mm × 2550mm (long × width × height)

Mecar size: 750mm × 600mm × 35mm (length × width × height)

Building building and smart building electrical installation virtual simulation software

Based on the UNITY3D design, users choose different interactive interface size based on the computer configuration. The software in the software can be rotated, magnified, reduced, and translated at 360 °. There are small assistant tips for software use, the content is as follows:

A. Wet alarm system

1. System summary: Overview of Wet Alarm System

2. Equipment cognition: there are ** perspectives, equipment det--ls (displayed or parameters of the device), practice (built -in 6 selection questions, there are prompts for correctness and errors), schematic diagrams (can be entered from the schematic diagram Go to the device). The equipment includes: nozzle, water flow indicator, signal butterfly valve, exhaust valve, fire alarm control, executive pressure gauge, high water tank, Weia control cabinet, stabilization tank, flow switch, end -end water testing device, dr--nage facility, water pump combinations, water pump combination Instruments, hydraulic bells, latencys, wet alarms, butterfly valves, stop valves, fire pumps, safe stabilization valves, fire pools.