Car Disassembling Training Desk

2. Equipment:

A: The well road frame: The supported steel frame uses 50 × 50 × 5#angle steel;

B: The car-the car rack is bent by the steel plate, the surface is sprayed with epoxy plastic, and the car wall is bent by st--nless steel to simulate the real elevator car. The size of the car: 1000 × 800 × 1000.

C: The car door-the supporting frequency door machine, the control opening and opening door can be moved, the door size: 1000 × 1000.

D: Direction r--l-supporting T89 solid r--l, fixed on the wall wall with angle steel brackets.

E: Safety Parts-4000kg of the T89 track of 4000kg is installed on the bottom of the car.

F: Comprehensive integration of professional skills tr--ning virtual simulation system

The software in the software can be rotated, magnified, reduced, and translated at 360 °. There are general interactive buttons: return, homepage, help. All virtual simulation tasks are prompted, and the software automatically hooks after a task. There is an experimental task above the tool library

1. Basic three -dimensional (XYZ space coordinate icon is automatically rotated at the XYZ space coordinate icon.)

A. Graphic stereo: The experimental steps are divided into experimental tasks (text prompt tasks) -the construction model (the model in the drag and dragging tool library to the three -projection surface system, and automatically appear the projection, there is a prompt when choosing an error) - change the attitude (by passing the passage) Click on the up, down, left and right arrows) — Select the projection (enter the answer interface, select the 3D projection map completed at this time in 6 items)

B. Cutting three -dimensional: The experimental steps are divided into experimental tasks (text prompt tasks) -the construction model (the model in the drag and drag the tool library to the three -projection surface system, and automatically display projection) -The label projection situation (for the three -dimensional projection drawing calibration , Select the corresponding labeling symbols in 14 blank fences)

Technical parameters and functional requirements

1.1 Test test function

The test object of the "Gear Transmission Performance Comprehensive Performance Performance Test Test Power" is a gear transmission device of various types. It m--nly completes the following performance test:

(1). The precision test experiment of gear transmission rotation motion.

(2). Gear transmission back gap measurement and twist rigidity test test.

(3). Gear transmission empty friction torque measurement test.

(4). Test test test test.

(5). Comprehensive performance test under gear transmission load.

2.1 M--n technical parameters

2.1.1 Drive part

Drive motor power: 3 KW

Drive motor rated speed: 1500rpm

Drive motor speed change range: 200-3000rpm (frequency conversion or servo driver speed regulation)

2.1.2 load part

The magnetic powder brake 200NM 630Nm is one.

The load size is input by the control system through the current control and automatic stability, and has manual control and load time spectrum.