Self -circulating Wenqili Traffic Experiment desk

1. Operating environment: temperature 0-40 ° C, relative humidity: ≤90%RH, power supply: 220V/50Hz, which can be continuously operated.

2. Experimental water tank: 30L, transparent and organic glass, and has a voltage voltage overflow.

3. Wenqiuli tube: diameter φ20 (inner diameter 14) mm, total length of 1000mm, Wenqili traffic meter throat diameter φ6.5mm, organic glass production.

4. Measurement of water tank: 6L, transparent organic glass, with measuring scale.

5. Water storage tank: 500 × 400 × 400mm, material PVC.

6. Silent and environmentally friendly water pump: r--sing: 10m, traffic: 12L/min, power: 90W.

7. The pressure meter meter is fixed on the measurement rack with 2 organic glass tubes with a diameter of 650mm in diameter of 650mm in diameter. The measured ruler is sticky on the measurement rack to facilitate the reading. The indicator liquid in the pressure difference is water, which is non -toxic and safe.

8. The fluid used in the experiment-water is full circular design, which fully saves water resources.

9. The frame and countertop are made of 304 st--nless steel. The structure is compact, the appearance is beautiful, and the operation is convenient.

10. Dimensions: 1600 × 500 × 1700mm (length × width × height), the frame is a mobile design, with a foot wheel and imprisoned feet.

11. Building building and smart building electrical installation virtual simulation software

This device can display pure electric vehicle energy systems, simulation system start, low -speed driving, general driving, full -speed driving, deceleration driving, and parking direction of energy flow and the running status of the motor. Working conditions.

It is suitable for the teaching needs of pure electric vehicle energy systems for "New Energy Vehicle and Electronic Technology".

2. Functional characteristics

1. Fully show the energy management system of pure electric vehicles, which can dynamically simulate the energy flow direction of the starting, low -speed driving, general driving, full -speed driving, deceleration, and parking of the motor.

2. The teaching board panel adopts a high -grade aluminum -plastic plate with 4mm thick corrosion resistance, strike, pollution resistance, fire prevention, and moisture -proof. Working principle diagram.

3. Install a ignition switch, work condition switch, throttle pedal, gear switch, brake switch, digital speed meter, current indicator table, etc., supplemented by the dynamic instructions for system flows, and set up a dynamic instructions for the light emitting diode. The T--wan analog motor is used to demonstrate the working state of the motor.

4. Demonstration panel parts use a 1.5mm thick cold plate stamping forming frame structure, beautiful appearance; the ch--n part is welded with steel structure, the surface is treated with spraying process, a self -locking wheel device, and the base of the teaching board is equipped with about 30cm. The desktop is convenient for placing data, light detection instruments, etc.

5. The work of the teaching board adopts a normal 220V AC power supply, which is converted into a 12V DC power supply by transformed by the internal circuit. No battery is required to reduce the trouble of charging. The 12V DC power supply has a short circuit function.

6. Machinery assembly and fitter assembly virtual simulation software: This software is developed based on Unity3D. It can select 6 -level image quality. It has the design and virtual disassembly of the reducer and shaft structure, the design and simulation of common mechanical institutions, institutional resource libraries, institutional resource libraries,, institutional resource library, institutional resource bank, institutional resource library, institutional resource library, institutional resource library, institutional resource bank, institutional resource library, and institutional resource library. Typical mechanical institutions (virtual disassembly of gasoline engines), software is an overall software, which cannot be separate resources.

A. Turbine design and virtual disassembly interface can be selected from turbine sn--l pole cone gear reducer, second -level pilot gear reducer, conical cylindrical gear reducer, coaxial cylindrical gear reducer, cone gear reducer, first -class cylindrical, first -class cylindrical, Gear reducer.